Tubes

Tube & Chiller Machines
Clean All Firetubes & Watertubes

GI Industries boiler & tube cleaning equipment and accessories for commercial and industrial maintenance are part of the full line of powerful tube cleaners. GI Industries Tube & Boiler tube cleaning system, was introduced over 35 years ago.

Our Brushes Follow Industry Standard
GI  brushes follow the industry standard, with screw threaded brushes, Safe & Secure.
We don’t recommend you use systems, that offer quick disconnect fitting. These historically fail, and leave brushes stuck in tubes. This will cause you delays and more costs.

Bulk Cleaning
Cleaning 100’s of tubes, you need an Industrial Machine. Quality is important.

Summary of Advantages

Specifications GI Machinery Purchase On Line   GI Benefits
  • Motor
High torque industrial motor Light duty motor Durable- little maintenance
  • Shaft Speed
1750 rpms 860 rpms Cleans tubes faster & better
  • Water Flushing
Standard tap pressure
High flow 2.2gpm
Min 30 PSI at 2 GPM
Requires other machinery
Does not require special water
source for flushing 
  • Shaft Attachments 
Any flexible shaft
Up to 150 ft max
Up to 45′ feet
Limited shaft length
Open structure can be used on
many different units
  • Construction Housing
Steel & aluminum Plastic case Strong and long lasting

        


Tubes & Chiller Series

TCM 100
Portable Machine

Boiler & Tubes
1750 rpms

The compact and powerful TCM 100 is lightweight and portable, It is ideal for water tube boiler cleaning and other types of tube cleaning applications. It features a variety of speed controls to match the type of deposit when cleaning virtually any tube or pipe diameter and length.

Flexible shafts and accessories are available for both, wet or dry applications, The TCM 100 uses a cleaning brush or tool mounted to the tip of a flexible shaft.

Wet Applications
The unit feeds water through the flexible shaft casing to the cleaning brush or tool, flushing out deposits as they are loosened.

Dry Applications
The BTA 100 Attachment and a simultaneous vacuum are used to remove loosened deposits.

Weight
This machine weighs only 38lbs.

Flexible Shafts
The TCM 100 system, will use any of the series 300 shafts.
From 15 ft to 75 feet as standard.

Item Product PDF
Data Sheets TCM 100 Portable Machine
Item TCM 101 System Contains Cost Each £ Add to Cart
TCM 100 Cleaning Machine x 1
FS 325 Flexible Shaft 25 feet x 1
SB 103 Nylon Brushes 5/8-inch x 12
SB 500 Polishing Brushes x 12
£2,100.00
or
$2,700.00
Add to cart

TCM 1000
Heavy Duty Machine

Boiler & Tubes
1725 rpms

Description
GI Industries TCM 1000 Heavy Duty Tube Cleaner is our most powerful and versatile unit. Use it for tubes, pipes and more, in wet or dry cleaning conditions. It incorporates the same operating principles as our portable TCM 100.

Equipped with a 1 HP electric belt driven motor, this machine has the strength needed to clean virtually any tube or pipe From: 1/4″ (6 mm) To: 18” (475 mm) as standard.

If you need a heavy duty machine, put the TCM 1000 to work for you. It is made for industrial cleaning of deposits in chillers, condensers, heat exchangers, boilers and other internal tubes.

Flexible shafts and accessories are available for both, wet or dry applications, The TCM 100 uses a cleaning brush or tool mounted to the tip of a flexible shaft.

Wet Applications
The unit feeds water through the flexible shaft casing to the cleaning brush or tool, flushing out deposits as they are loosened.

Dry Applications
The BTA 100 Attachment and a simultaneous vacuum are used to remove loosened deposits.

Flexible Shafts
The TCM 1000 system, will use any of the series 300 shafts.
From 15 ft to 75 feet as standard.

Item Product
Data Sheet TCM 1000 Heavy Duty Machine

TCM 200
Portable Machine

Chiller & Tubes
0 – 1725 rpms

The compact and powerful TCM 200 is lightweight and portable, It is ideal for all Hvac / Condenser & Chiller / Evaporator tube cleaning applications. It features a variety of speed controls to match the type of deposit when cleaning virtually any tube or pipe diameter and length.

With GI Industries quick connection coupling, our shafts and brushes to provide the ultimate cleaning of straight tubes, in a large variety of chillers.

It is powered by a 1/2HP direct drive motor, heavy duty water solenoid.

Flexible shafts and accessories are available for both, wet or dry applications, The TCM 200 uses a cleaning brush or tool mounted to the tip of a flexible shaft.

Wet Applications
The unit feeds water through the flexible shaft casing to the cleaning brush or tool, flushing out deposits as they are loosened.

Dry Applications
The BTA 100 Attachment and a simultaneous vacuum are used to remove loosened deposits.

Weight
The TCM 200 only weighs 38 pounds

Flexible Shafts
The TCM 200 system, will use any of the series 300 shafts.
From 15 ft to 75 feet as standard.

Item Product
Data Sheet TCM 200 Portable Machine
Data Sheet TCM 200A Air Powered

TCM 2000
Heavy Duty Machine

Chiller & Tubes
0 –862 rpms

The TCM 2000 is the best in the business for enhanced or smooth bores. The variable speed control is the ultimate in cleaning power.

It is powered by a 1/2HP direct drive motor, heavy duty water solenoid.

Flexible shafts and accessories are available for both, wet or dry applications, The TCM 2000 uses a cleaning brush or tool mounted to the tip of a flexible shaft.

Wet Applications
The unit feeds water through the flexible shaft casing to the cleaning brush or tool, flushing out deposits as they are loosened.

Dry Applications
The BTA 100 Attachment and a simultaneous vacuum are used to remove loosened deposits.

Flexible Shafts
The TCM 2000 system, will use any of the series 300 shafts.
From 15 ft to 75 feet as standard.

Item Product
Data Sheets TCM 2000 Heavy Duty Machine

TCM 1000H
Dual Use Machine

Boiler & Chiller
862 rpms
High torque motor

If you have both Boilers and Chillers to clean, the TCM 1000H is the right product. This innovative system thoroughly cleans all fire-tube / water-tube boilers and all chillers, condensers etc.

It features a variety of speed controls to match the type of deposit when cleaning virtually any chiller tube or boiler tube, diameter and length.

The system comes complete with TCM 1000H / BTA 100 Boiler Gun / Vac 100 Commercial Vacuum and Vacuum Tool Kit.

Wet Applications
The unit feeds water through the flexible shaft casing to the cleaning brush or tool, flushing out deposits as they are loosened.

Dry Applications
The BTA 100 Attachment and a simultaneous vacuum are used to remove loosened deposits.

Flexible Shafts
The TCM 1000 dual use system, will use any of the series 300 shafts.
From 15 ft to 75 feet as standard.

Item Product
Data Sheets TCM 1000H Dual Use System

SAB Series (120 Grit)
Standard Abrasive Brushes

For All Firetube or Watertube Boilers. GI Standard Abrasive Brush Series are excellent for cleaning deposits in firetube or watertube boilers. Recommended for removing hard deposits in straight, ferrous and nonferrous tubes. Order brush to correspond to tube I.D.

Description
For all Boiler Tube Cleaning & Polishing Tubes. Ideal for Medium to Hard Deposits. These brushes will remove all deposits / scale and polish your tubes like new.

Item Product  
Data Sheet Tube Chiller Brushes 120 Grit / Nylon
Item Description Inch mm
SAB 050 Standard Abrasive Brush 1/2 Inch 12.7 mm
SAB 062 Standard Abrasive Brush 5/8 Inch 15 mm
SAB 075 Standard Abrasive Brush 3/4 Inch 19 mm
SAB 085 Standard Abrasive Brush 1. 18 Inch 30 mm
SAB 090 Standard Abrasive Brush 1. 57 Inch 40 mm
SAB 100 Standard Abrasive Brush 1. 77 Inch 45 mm
SAB 200 Standard Abrasive Brush 2 Inch 50 mm
SAB 255 Standard Abrasive Brush 2.16 Inch 55 mm
SAB 265 Standard Abrasive Brush 2.55 Inch 65 mm
SAB 275 Standard Abrasive Brush 2 3/4 Inch 70 mm
SAB 300 Standard Abrasive Brush 3 Inch 76 mm

SGB 400 Series
Spin Grit Brushes

GI Spin Grit Brushes are for use in internally enhanced tubes. This abrasive brush has a tapered trim and is made oversized so it bends over ensuring maximum contact, the short bristles are able to get into the grooves.

Size of Brushes
From: 1/2 inch to 1 inch as standard.
From: 12 mm to 25mm.

Used For
For All Firetube or Watertube Boilers. Recommended for removing soft and light scale deposits in straight, ferrous and non-ferrous tubes. This brush’s abrasive impregnated nylon bristles clean and polish tubes in one step. Unlike regular spiral brushes the Spin-Grit brush is designed to be oversized in the tube so the bristles lay over, putting the brush in contact with the tube wall.

Item Product
Data Sheet Tube Chiller Brushes 120 Grit / Nylon