Pipe Drain Cleaning

Heavy Duty Machines
Cleaning Grinding Polishing

Pipe Drain Sewer Industries

Cleaner safer and more effective drain cleaning. GI Industries high speed cleaning, grinding and polishing machines.
TCM 5000 Merlin system designed for the rapid cleaning and removal of all deposits in pipe, drain and sewers up to 600 mm.

Rubber & Tyre Machinery World

Do you use Centrally Cored Rolls or Peripherally Drilled Rolls in your Two-Roll Mixing Mills? Or a combination of both?
GI Industries TCM 6000 Warlock system will clean and polish the internal cores, without the use of any chemicals.
Suitable For Use In The Tyre Industry, Paper Industry, PVC, Rubber Industry,  Film, Foil and Sheet Industry.

Facility Plumbing

When you have boiler tubes and process pipes to clean.
GI Industries TCM 6000 Warlock system cleans from 1/2 inch to 24 inch pipe diameters.

  • Machines Available
TCM 6000: Powerhouse Machine & Extreme Torque. TCM 5000: High Speed Heavy Duty. TCM 3000: Portable & Compact.
  • Air & Water Flushing

For wet applications, the GI machines feeds water through the flexible shaft, to the cleaning tool, flushing out deposits as they are loosened.
Moves debris out Faster and Cools cutting head.

Use Air in Shaft (10 Bar 150 psi)
Hot or Cold Water in Shaft (10 Bar 150 psi)
Use Steam in Shaft (180°C)
Click Here For Information On Water Flushing.


Cleaning Grinding Polishing Machines

TCM 6000 Warlock
GI Powerhouse Machine & Extreme Torque

Description:
This machine has extreme torque and will maintains constant speed. Powerful machine, designed for hard work. The Warlock system quickly and easily clears grease build-up, roots, tough debris and building cement, plaster etc.

It is designed with a soft start circuit that reduces operator fatigue and machine wear, giving you more control cleaning the drains or pipes.

TCM 6000 Machine Capabilities

Runs off standard 13 amp plug.
Dual use machine. Ideal for cleaning process pipes.
Cleans pipe diameters 1/2 up to 24 Inches or DN 15 to DN 6000.
Flexible shafts  will clean up to 150 feet pipe runs or up to 46 mtrs as standard.
Bi-Directional shafts Forward for drilling, Reverse for polishing. Neutral for dislodging.
The option to use air or water through the shaft, Moves debris out Faster and Cools cutting head.
Extreme Torque The 1 Hp motor has the output shaft coupled to a gear reduction setup, Increases the torque power by (x 3).

Specifications Of TCM 6000

Power Consumption
Draws 11 -12 amps under load
Clean Pipe Diameters
From: 1/2 Inch to 24 Inches
Cleans Pipe Drain Length
From 10 ft to 150 ft.
Air & Water Flushing
Use Air or Water In Shaft
Engine Motor
1 HP electric motor
Extreme torque setting
Power Source
13 amp electric plug
From 110V to 240V
Powerful & Portable
Constant speed motor
0 – 1200 rpms
Lightweight & Portable
Weight Motor: 50 lbs / 23 kgs
Weight Cart: 22 lbs / 10 kgs
Item Product  Rpms PDF
Data Sheet TCM 6000 Warlock 0-1200 rpms
Setting Up All GI Machines Information
Setting Up TCM 5000 /6000 Video  Click Here For Video

Item TCM 6002 Warlock Starter Package: Get A Pipe Quote
TCM 6000 Warlock Machine x 1
FS 575 Flexible Shaft 75 feet (22.86 mtrs) x 1
PE 100 Pictote Tool Adapter x 1

Get Your GI Quote Here


Item TCM 6001 Warlock Contractors Package: Get A Pipe Quote
TCM 6000 Warlock Machine x 1
FS 501 Flexible Shaft 100 feet x 1
FS 550 Flexible Shaft 50 feet x 1
FS 325 Flexible Shaft 25 feet x 1
FS 500R Flexible Shaft Tool Kit x 1
PC 003 3inch Finger Root Cutter x 1
PE 100 Pictote Tool Adapter x 1
DTC 600 General Tool Adapter x 1
PC 004 4inch Re-Instater x 1
PDB 400S 4inch Pipe Brush 40 Grit x 1
PDB 200S 2inch Pipe Brush 40 Grit x 1
GR 010 1 1/2inch Ball Grinder x 1

Get Your GI Quote Here

TCM 5000 Merlin
High Speed Heavy Duty

Description:
The TCM 5000 is our heavy duty pipe cleaning machine that is designed for high speed grinding / cleaning. It is GI Industries universal drain cleaner, where power meets portability.

Ideal for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies.  Works from any standard household 13 amp electric plug.

TCM 5000 Machine Capabilities

Runs off standard 13 amp plug.
Cleans pipe diameters 1/2 up to 24 Inches or DN 15 to DN 6000.
Flexible shafts  will clean up to 150 feet pipe runs or up to 46 mtrs as standard.
Bi-Directional shafts Forward for drilling, Reverse for polishing. Neutral for dislodging.
The option to use air or water through the shaft, Moves debris out Faster and Cools cutting head.
The TCM 5000 is a multi use machine excellent for tools which require higher speeds like chains etc.

Specifications Of TCM 5000

Power Consumption
Draws 9-11 amps under load
Clean Pipe Diameters
From: 1/2 Inch to 24 Inches
Cleans Pipe Drain Length
From 10 ft to 150 ft.
Air & Water Flushing
Use Air or Water In Shaft
Engine Motor
3/4 HP electric motor
Double belt driven
Powerful & Portable
Variable speed motor
0 – 1750 rpms
Power Source
13 amp electric plug
From 110V to 240V
Lightweight & Portable
Weight Motor: 44 lbs / 20 kgs
Weight Cart: 22 lbs / 10 kgs

 

Item Product  Rpms PDF
Data Sheet TCM 5000 Merlin 0-1750 rpms
Setting Up All GI Machines Information
Setting Up TCM 5000 /6000 Video  Click Here For Video

Item TCM 5002 Merlin Starter Package: Get A Pipe Quote
TCM 5000 Merlin Machine x 1
FS 575 Flexible Shaft 75 feet (22.86 mtrs) x 1
PE 100 Pictote Tool Adapter x 1

Get Your GI Quote Here


Item TCM 5002 Merlin Contractors Package: Get A Pipe Quote
TCM 5000 Merlin Machine x 1
FS 501 Flexible Shaft 100 feet x 1
FS 550 Flexible Shaft 50 feet x 1
FS 500R Flexible Shaft Tool Kit x 1
PC 003 3inch Finger Root Cutter x 1
PE 100 Pictote Tool Adapter x 1
DTC 600 General Tool Adapter x 1
PC 004 4inch Re-Instater x 1
PDB 400S 4inch Pipe Brush 40 Grit x 1

Get Your GI Quote Here

TCM 3000 Wizard
Portable & Lightweight

Description:
The TCM 3000 is our portable high speed pipe cleaning machine, for drilling and reaming pipes. It features a professional 3/4 HP internal direct drive motor. For maximum power and high speed grinding and cleaning in confined spaces. Ideal for residential indoor use.

TCM 3000 Machine Capabilities

Runs off standard 13 amp plug.
Cleans pipe diameters 1/2 up to 24 Inches or DN 15 to DN 6000.
Flexible shafts  will clean up to 150 feet pipe runs or up to 46 mtrs as standard.
Bi-Directional shafts Forward for drilling, Reverse for polishing. Neutral for dislodging.
The option to use air or water through the shaft, Moves debris out Faster and Cools cutting head.
The TCM 3000 is a multi use machine ideal for tight small areas, for tools which require higher speeds like chains etc.

Specifications Of TCM 3000

Power Consumption
Draws 9 -11 amps under load
Clean Pipe Diameters
From: 1/2 Inch to 24 Inches
Cleans Pipe Drain Length
From 10 ft to 150 ft.
Air & Water Flushing
Use Air or Water In Shaft
Engine Motor
3/4 HP electric motor
Direct drive motor
Powerful & Portable
Constant speed motor
0 – 1750 rpms
Power Source
13 amp electric plug
From 110V to 240V
Lightweight & Portable
Weight Motor: 44 lbs/ 20 kgs
Dimensions: 49 x 28 x 23 cm
Item Product  Rpms PDF
Data Sheet TCM 3000 Wizard 0-1750 rpms
Setting Up All GI Machines Information
Setting Up TCM 5000 /6000 Video  Click Here For Video

Item TCM 3002 Wizard Starter Package: Get A Pipe Quote
TCM 3000 Wizard Machine x 1
FS 550 Flexible Shaft 50 feet x 1
PE 100 Pictote Tool Adapter x 1

Get Your GI Quote Here


Item TCM 3001 Wizard Contractors Package: Get A Pipe Quote
TCM 3000 Wizard Machine x 1
FS 501 Flexible Shaft 100 feet x 1
FS 550 Flexible Shaft 50 feet x 1
FS 500R Flexible Shaft Tool Kit x 1
PC 003 3inch Finger Root Cutter x 1
PE 100 Pictote Tool Adapter x 1
DTC 600 General Tool Adapter x 1
PC 004 4inch Re-Instater x 1
PDB 400S 4inch Pipe Brush 40 Grit x 1

Get Your GI Quote Here

DCM 345
Hepa Vacuum

Enjoy the versatility of wet or dry performance. The DCM 345 HEPA Wet Dry Industrial Vacuum is the safe solution for fine particle recovery applications. Equipped with a triple motor power, the DCM 345 HEPA produces a static water lift of 88 inches (2.23m) and an air displacement of 400 CFM (11.32 m3/min).

Pipe Drain Sewer

We have adapted the DCM 345S  to use in pipes drains and sewers with optional dump valve. Hose available in 50 ft lengths.

How to Clean Pipes

Using the GI Pipe Drain Sewer Machinesattach the flexible shaft to the vacuum hose. Insert both into the pipe, the flexible shaft will grind, descale and clean the pipe while the DCM 345S removes water, moisture, scaling and debris at the same time leaving the pipe ready for resurfacing.

Specifications Of DCM 345

Tank Capacity
15 Gallon tank
Cubic Feet Minute
400 CFM
Water Lift
88” water lift
Shut Off Value
Yes
Power Source
From 110V to 240V
50 Hz / 60 Hz
Engine Motor
(3) 1.5HP.
115 volt electric motor
Shut off flow
water overflow
Yes
Dump valve
draining water from drum
Yes
Item Product  Rpms PDF
Data Sheet DCM 345 Pipe Drain Vacuum 400 cfm
Get Your GI Quote Here

GI Accessories
Pipe Cleaning Tools

When it comes to Unblocking Drains, Pipes and Sewers, GI Industries have a tool to suit your every need or requirement.
Practical
You Can Do All This:- Cleaning – Descaling – Rehabilitation – Reinstatement – Relining – Unblocking – Grease Fat Removal
Suitable For
You can tackle all pipes drains sewers:- Asbestos – ABS – Clay – Copper – Cast Iron – Ductile Iron Pipe – Galvanised – Plastic – PVC – Steel etc

1. SAB Series 120 Grit: Removing light debris or pipe fouling, Fine tuning and the best finish available, before you spray the epoxy or lining.
2. PDB Series 40 Grit: Are extremely hard wearing, and are ideally suited for harsh and tough deposits.
3. Diamond Tipped: Removes concrete, grout, slurry and large rocks. May be used to grind offsets in clay and concrete pipe.
4. Sintered Diamond: Used for aggressive grinding applications. Grinding into Brick, Tile, Concrete, Stone and other building material.
5. Reinstatement Tool: For situations where the failed liner has collapsed or is against the pipe wall.
6. Bi-Directional Chains: Bi-Directional Chains are designed to handle any type of blocked pipe or drain debris.
7. Wire Grinders Series: Removing heavy duty debris and roots, to aggressive cleaning of welds and splatter etc.
8. Carbide Tipped Series: All round grinding tool. Can cut and break through most objects you will come across when clearing pipes & drains.
9. Grease Fat Tool: This strong and versatile cutter clears blockages caused by hardened, glazed material such as chemical deposits.
10. Ball Grinder: Will remove solid debris cement plaster etc from full or partially filled pipes and drains.


SAB Brushes 120 Grit
Limescale / Calcium
Light Debris or Final Finish etc
PDB Brushes 40 Grit
Rust / Problem Fouling
Hard Debris etc
Diamond Tipped
Concrete
Solid Debris
Sintered Diamond Tipped
Concrete
Solid Debris
Sizes:

From: DN15 To: DN600
From: 1/2 Inch To: 24 Inches

Sizes:

From: DN50  To: DN600
From: 2 Inch To: 24 Inches

Sizes:

From: DN50 To: DN250
From: 2 Inch To: 10 Inches

Sizes:

From: 100 / 125 mm & 177 mm
From: 4 /  5 Inch & 7 Inch


Pipe Reinstatement
Collapsed Liner
Step Cutter & Grinders
Chains Light Duty
CLD Series Bi-Directional Chains
Chain Heavy Duty
CHD Series Bi-Directional Chains
Circular Chain Knockers
CCK Series Bi-Directional Chains
Sizes:

From: 2 Inch to 6 Inch
From: 50 mm to 150 mm

Sizes:

From: 2 Inch to 6 Inch
From: DN50 to DN150

Sizes:

From: 2 Inch to 6 Inch
From: DN50 to DN150

Sizes:

From: 2 Inch to 6 Inch
From: DN50 to DN150


Twisted Wire Grinders
Hard Debris
Roots or Blockages
Carbide Tipped
Heavy Fouling
Cement / Plaster
Grease Fat Tool
Chemical Liquids
Oil  / Fat etc
Carbide Ball Grinder
For 2 Inch Pipe
Aggressive 16 Grit
Sizes:

From: 2 Inch to 6 Inch
From: 50 mm to 150 mm

Sizes:

From: 4 Inch to 8 Inch
From: 100 mm to 200 mm

Sizes:

From: 2 Inch to 4 Inch
From: DN50 to DN100

Sizes:

Only: 1  1/2 Inch
Only: 38 mm Ball

New items
GI Chains

Item Product  Item Rpm Max
Up to 1750 rpms
with air or water through shaft
keeps chain head cool.