Hvac

Duct & Hvac Products
Duct Cleaning With High Powered Air

GI Industries manufactures and distributes a complete line of Air Duct cleaning equipment and supplies for the cleaning of Hvac systems and Duct-work.  For cleaning of Residential and Commercial air duct systems.

Multi-Purpose
You can tackle all Ducting:- Dryer vents are usually 4 inches, Feeder trunks are from 4 / 6 or 8 inches, Main trunk up to 12 x 24 inches

Practical
You Can Clean All These:- Galvanized steel. Aluminium, Polyurethane and phenolic, Pre-insulated air ducts, Fiberglass duct board, Non-metallic duct-work, Flexible ducting & Fabric ducting.

Vacuums
GI Industries full line of industrial and commercial vacuum systems includes HEPA vacuums, Pipe & Drain Vacuums, Backpack Vacuums, Hazardous Material, Industrial Air Powered Vacuums and Custom Industrial Vacuums. To learn more about GI Industrial vacuums browse our product categories below.


Duct & Hvac Series

DCM 100
Portable Machine

0 – 1750 rpms
Variable Speed

Duct Cleaning With High Powered Air
Do you need an competitive edge in the Duct Cleaning market ? GI Industries have the solution, Our shafts have the ability to run with or without compressed air through them. This means Dual Cleaning process at cost effective prices.

The DCM 100 is our portable system that has all the same features as the DCM 600.

Used For
Flexible Ducts / Steel Ducts / Insulated Ducts.

The brush speed ranges from 0 – 1725 rpms for high speed brushing.

Item Product PDF
Data Sheet DCM 100 Portable
Duct Cleaning Description SetUp
Item DCM 101 System Contains : Cost Each £ Add to Cart
DCM 100 Brushing Machine x 1
Flexible Shaft 35’ (FS535) x 1
Flexible Shaft Tool Kit x 1
DCB 012 Duct Brush 12 Inch x 1
DCB 014 Duct Brush 14 Inch x 1
DCB 018 Duct Brush 18 Inch x 1
DCM 345 Hepa Vacuum x 1
Vacuum Tool Set Complete x 1
Inflatable Duct Bag x 1
Literature Set x 1
£4,665.53

DCM 600
Heavy Duty Machine

0 – 862 rpms
Variable Speed

The variable speed brushing unit cleans all steel/ flex/insulated and dryer ducts quickly and thoroughly.

A single operator controls the rpms of the brushing (0 862.5 rpm). This system is used around the world. Commercial or Residential Use.

Duct Cleaning With High Powered Air
Do you need an competitive edge in the Duct Cleaning market ? GI Industries have the solution, Our shafts have the ability to run with or without compressed air through them. This means Dual Cleaning process at cost effective prices.

Used For
Flexible Ducts / Steel Ducts / Insulated Ducts / Spiral Ducts / Square Ducts / Round Ducts — Best Machine.

Item Product PDF
Data Sheet DCM 600 Heavy Duty
Duct Cleaning Description SetUp

DCM 601
Short Run System

0-862 rpms
Variable Speed

The DCM 600 is our heavy duty machine made for cleaning deposits in flex, insulated, steel, round, and rectangular ductwork.

For Residential or commercial properties where the DCM 345 duct vacuum cleaning work is for 20 minutes to 1 hour at any single time.

Duct Cleaning With High Powered Air
Do you need an competitive edge in the Duct Cleaning market ? GI Industries have the solution, Our shafts have the ability to run with or without compressed air through them. This means Dual Cleaning process at cost effective prices.

Cleans All Your Ducts
Main trunk up to 12 x 24 inches.
Dryer vents are usually 4 inches.
Feeder trunks are from 4 / 6 or 8 inches.

Used For
Flexible Ducts / Steel Ducts / Insulated Ducts / Spiral Ducts / Square Ducts / Round Ducts.

Item Product PDF
Data Sheet DCM 601 Short Run System
Data Sheet DCM 345 Vacuum
Duct Cleaning Description SetUp
Item DCM 601 Short Run System : Cost Each £ Add to Cart
DCM 600 Brushing Machine x 1
Flexible Shaft 35’ (FS535) x 1
Flexible Shaft Tool Kit x 1
DCB 004 Duct Brush 4 Inch x 1
DCB 012 Duct Brush 12 Inch x 1
DCB 014 Duct Brush 14 Inch x 1
DCB 018 Duct Brush 18 Inch x 1
DCB 024 Duct Brush 24 Inch x 1
DCM 345 Hepa Vacuum x 1
Vacuum Tool Set Complete x 1
Inflatable Duct Bag 10 13 Inch x 1
Literature Set x 1

DCM 602
High Flow System

0-862 rpms
Variable Speed

The DCM 602 system is the ultimate in duct cleaning. This heavy duty DCM 5000 Hepa vacuum can work for 45 minutes to 90 minutes in a single session.

DCM 5000 Hepa Vacuum
Has High & Continuous air power (5000 CFM,) HEPA filter rated at 99.97% & air scrubber. Guaranteed to clean any ductwork in very short time.

System contains the DCM 5000 Hepa Vacuum and the DCM 600 Heavy Duty Variable Speed machine.

Duct Cleaning With High Powered Air
Do you need an competitive edge in the Duct Cleaning market ? GI Industries have the solution, Our shafts have the ability to run with or without compressed air through them. This means Dual Cleaning process at cost effective prices.

Used For
Flexible Ducts / Steel Ducts / Insulated Ducts / Spiral Ducts / Square Ducts / Round Ducts.

Item Product PDF
Data Sheet DCM 602 High Flow Commercial System
Data Sheet DCM 5000 Vacuum
Duct Cleaning Description SetUp

DCM 345
Hepa Vacuum

Enjoy the versatility of wet or dry performance. The DCM 345 HEPA Wet-Dry Industrial Vacuum is the safe solution for fine particle recovery applications. Equipped with a triple motor power, the DCM 345 HEPA produces a static water lift of 88 inches (2.23m) and an air displacement of 400 CFM (11.32 m3/min).

Can also be adapted to use in pipes drains and sewers with optional dump valve.

Item Product PDF
Data Sheet DCM 345 Hepa Vac

DCM 5000
Commercial Hepa Vacuum

The DCM 5000 commercial vacuum is made for removing deposits in HVAC ducts, ventilation, and other internal ducts. It features a large storage tank, (2)1.5HP. 115volt electric motor, 5000 CFM, a HEPA filter rated at 99.97%

Air Scrubber in situations of fire damage this machine can purify the air and remove all Air Borne Particles that are considered hazardous to your health.

Item Product PDF
Data Sheet DCM 5000 Hepa Vac

Vac 100 & Vac 200
Wet and Dry Vacuum

The Vac 100 is ideally suited for both wet and dry collection of dust and debris. A 15-gallon collection container and efficient motor ensure minimal maintenance upkeep. Once the tank is full requires to be manually emptied.

The Vac 200 is the same Rugged and powerful model as the Vac 100, but has the optional automatic discharge wet vacuum. The Machine will automatically discharge collected water.

Item Product PDF
Data Sheet Vac 100 Wet and Dry Vacuum
Data Sheet Vac 200 Wet and Dry Vacuum

Vac 605 HEPA Vacuum
Backpack HEPA Vacuum

The Vac 605 Backpack HEPA Vacuum offers superior filtration in a compact package. It is easy to carry an ideal for critical Cleaning in areas where using a large HEPA vacuum would be difficult. The unit produces a static water lift of 88″ and an air Displacement of 95 CFM.

Item Product PDF
Data Sheet Vac 605 Backpack

Vac 606Q HEPA Vacuum
Quiet Industrial HEPA Vacuum

The Vac 606Q an excellent vacuum solution for use in both commercial and residential environments, Excellent for Low Noise Environments. The Vac 606Q is our most innovative vacuum cleaner that combines low noise, clean exhaust air and suction performance with a European made appearance, in an ultra-compact design.

Item Product PDF
Data Sheet Vac 606Q Quiet Vacuum
Data Sheet Waste Clean Up Instructions

Vac 615 HEPA Vacuum with Drum and Dolly
Wet & Dry Hazardous Waste

The Vac 615 Wet & Dry HEPA Vacuum is the unit of choice for commercial dry-only fine particle recovery applications. It produces a lift of 110″ and an air displacement of 115 CFM. It features a three stage filtration system that delivers 99.97% filtration at 0.3 microns! Also offers a full assortment of accessories tackle a wide range of applications. When proper clean-up is an absolutely necessity, the Vac 615 is the perfect choice.

Vac 615D HEPA Vacuum with Drum and Dolly
Dry Hazardous Waste

The Vac 615D Dry Hepa Vacuum are ideal suited for hazardous applications involving asbestos. Engineered for dusty environments that require regular cleaning, the HEPA filter is designed with high capacity in mind. Ordinary vacuums can clog up quickly in environments with an abundance of dust or particulates. An economical, easily maintained pre-filter stops larger particles of debris while the HEPA filter handles smaller matter.

Item Product PDF
Data Sheet Vac 615 Wet & Dry
Data Sheet Vac 615D Dry

DCB Series
Duct & HVAC Cleaning Brushes

GI Industries manufacture and offer a full line of duct cleaning brushes and brush systems for the cleaning of all types of duct work. We offer a full range for both residential and commercial applications.

All our brushes are designed for thorough source removal of all Dust and Debris. Round, square and rectangular shapes in stock. Larger brushes have more density and stiffer filament for aggressive cleaning on duct surfaces.

Suitable For
For All Hvac / Ducts / Communication Vents etc

Size of Brushes
From: 4 Inch to 48 Inch as standard.
From: 100 mm to 1200 mm

Sizes Available

Item Description Inch mm
DCB 004 Duct Cleaning Brush 4 Inch 100 mm
DCB 005 Duct Cleaning Brush 5 Inch 127 mm
DCB 006 Duct Cleaning Brush 6 Inch 152 mm
DCB 008 Duct Cleaning Brush 8 Inch 200 mm
DCB 012 Duct Cleaning Brush 12 Inch 304 mm
DCB 014 Duct Cleaning Brush 14 Inch 355 mm
DCB 018 Duct Cleaning Brush 18 Inch 457 mm
DCB 024 Duct Cleaning Brush 24 Inch 600 mm
DCB 048 Duct Cleaning Brush 48 Inch 1200 mm
Item Product Type PDF
Data Sheet Duct & Hvac Brushes Standard

DCBM Series
Abrasive Brush For Mold 320 Grit

GI Industries 320 grit mold brushes designed to gentle dislodge and restore peak energy efficiency, eliminate offensive odours and stop mould growth in your Office / Home or Industrial Units.

Suitable For
For Mold Problems in Ducting & Hvac Ventilation Systems.

Size of Brushes
From: 4 Inch to 24 Inch as standard.
From: 100 mm to 600 mm.

Sizes Available

Item Description Inch Inch mm
DCBM 004 320 Grit Abrasive Brush For Mold 4 100
DCBM 006 320 Grit Abrasive Brush For Mold 6 152
DCBM 008 320 Grit Abrasive Brush For Mold 8 200
DCBM 010 320 Grit Abrasive Brush For Mold 10 254
DCBM 018 320 Grit Abrasive Brush For Mold 18 457
DCBM 024 320 Grit Abrasive Brush For Mold 24 600
Item Product Type PDF
Data Sheet Mold Duct & Hvac Brushes 320 Grit

FS Shaft
Chemical Injector Complete

GI Industries New and Improved downstream chemical injector. Works great with any of GI Industries machines.

Pressure Range
All GI Machines can handle up to 10 bar / 150 psi.

Water Flow Rate
GI machines can handle up to 2.2 gpm.

Usage
Mix chemical solution,  put solution into suitable large container and attache Injector to GI machine, Place Injector into solution.
Then you can commence cleaning, as you press the foot-switch this opens the value and the water is taken through the machine until it comes out at the brush end.

Item