Gun Bore Cleaning Brushes

Gun Bore Cleaning Brushes

Barrel Cleaning & Bore Polishing
Calibers 5.56 mm to 240 mm
Finish To White Glove Standard

Small Arms Pistol and Rifle Barrels, Artillery Bores, Tank Barrels, All Smooth Bore Tubes and Rifled Barrels. When it comes to military barrel cleaning, Having the Right Tools are imperative to a successful completion of the task at hand.

GI Small Arms brushes are corrosive-resistant with a tighter twist for better bristle retention and brush life. Each brush will clean at least 50 Barrels, you get superior quality and precision cleaning every time.

If You Are Cleaning These Types of Military Barrels, You Should Talk to GI Industries

M134 Minigun GAU-19B .50 Cal GAU-8 Avenger

M242 Bushmaster

30 mm Cannon

Mark 19 40 mm


Carbon Ring
Small Arms Weapon

Cleaning Carbon Ring In Military .50 Cal / 12.7 mm Barrels

Cleaning Carbon Ring In Military .50 Cal / 12.7 mm Barrels. The carbon ring in the military bore can affect accuracy, pressure and velocity. It is more likely to occur in cartridges with large case capacity. The carbon ring is best identified with a bore scope and will appear as dark and cracked areas of the bore. It is usually 1”-2” in front of the throat and chamber or within the first 30% of the bore.

It is ideal to inspect with a borescope to determine whether you have issues with carbon ring build-up and where it appears in the bore.

Diamond Dust
Diamond dust in Your Barrel, like the formation of a diamond, heat and pressure can transform carbon fouling into a ceramic layer that is difficult to remove. So don’t be misled into thinking magical solvents will remove this problem. Bio-friendly or Natural chemical solvents will not remove this carbon or copper fouling.

In a .50 caliber barrel you have the carbon ring, Using copper solutions will not remove this problem. With a GI Industries Small Arms Cleaning Brush, you can clean a .50 cal barrel in under 2 minutes.

The Solution
GI Industries Barrel & Bore Cleaning System, Do not require any chemicals or solvents for cleaning. In effect, chemicals do not achieve any cleaning, rather it is the brush which actually does the cleaning.

Using a Small Arms Cleaning Brush (SACB) you can clean a .50 cal barrel within 2 minutes, remove all and any carbon problems.

Removing Carbon Ring  Close Up .50 Cal Barrel 20 mm Barrel Small Arms Brushes

Small Arms Brushes
5.56 mm to 15.2 mm

Description
Small Arms Brushes

The Small Arms Clean Brush Ideally suited for all Mini Guns / Gatling Guns / Electrically Driven Rotary Breech Weapons / High Fire Rate Cannons.

The SACB Series is a resilient, flexible honing brush with a soft cutting action. Whether it’s cleaning or polishing a weapon barrel. The SACB brush will provide a superior surface finish with a crosshatched pattern. Guaranteed  to remove the copper layer and all firing residues.

Small Arms Brush Series

  • SACB Series Cleaning Brushes 120 Grit (Min Qty x 10 Brushes)
    Removes all firing residue, including copper, carbon lead and plastic.
  • SAPB Series Polishing Brushes 180 Grit (Min Qty x 10 Brushes)
    Polish and Fine tune your barrel, remove scratches or fine marks.
  • SAMB Series Cotton Swab Mop Brush (Min Qty x 10 Brushes)
    They are made of the highest quality construction possible.

Will remove all firing residues, including carbon and copper, including the Carbon Ring. Ideally suited for use in .50 BMG / M82A1, / M107A1 / M2 type barrels.

GI Small Arms Brushes
Standard Calibers 5.56 mm / 7.62 mm / 9 mm / 12G Shotgun / 12.7 mm / 14.5 mm /15.2 mm.

Optional Extra Calibers
6.5 mm Creedmoor /  10 mm Pistol / .45 ACP / .338 Lapua Magnum.

Item Product Description PDF
Data Sheet Military Brushes Small Arms Brushes

Small Arms Brushes 5.56 mm

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

These brushes require the 5.56 mm carbon adapter
The small arms adapter is a custom carbon rod that fits onto the MFS 200 series shaft.

Small Arms Brushes 7.62 mm

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

These brushes require the 7.62 mm carbon adapter
The small arms adapter is a custom carbon rod that fits onto the MFS 200 series shaft.

Small Arms Brushes 9 mm

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

These brushes require the 9 mm carbon adapter
The small arms adapter is a custom carbon rod that fits onto the MFS 200 series shaft.

Small Arms Brushes 12G Shotgun

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

Small Arms Brushes 12.7 mm

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

Small Arms Brushes 14.5 mm

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

Small Arms Brushes 15.2 mm

Brush Dia Type Material Free Military Quote 
SACB Cleaning Brush

SAPB Polishing Brush

SAMB Mop Brush

120 Grit

180 Grit

Cotton

SMALL ARMS CARBON ROD ADAPTER

Small Arms Carbon Adapter
The small arms adapter is a custom carbon rod that fits onto the MFS 200 shaft. Once attached you can even clean all you 5.56 mm / 7.62 & 9 mm barrels.
This is truly the most versatile and adaptable small arms cleaning system available today.

GI Small Arms Adapter
Standard Calibers 5.56 mm / 7.62 mm / 9 mm.

Optional Extra Calibers
6.5 mm Creedmoor /  10 mm Pistol.

Item Caliber / Length Rod Weapon Type Free Military Quote 
Set 1:  5.56 mm Adapter
10 x Cleaning Brushes
Length: 16 / 20 / 26 Inch
Rifle
Set 2: 7.62 mm Adapter
10 x Cleaning Brushes
Length: 16 / 20 / 30 Inch
Rifle
Set 3: 9 mm Adapter
10 x Cleaning Brushes
Length: 9 / 12 / 20 Inch
Pistol
Set 4: Complete Package
Contains Sets 1 to 3
All Calibers

Cleaning Smooth Bore
20 mm to 240 mm

Description
Smooth Bore Brush

The (CSB) Cleaning Smooth Bore Brush is a resilient flexible brush with a soft action. Its unique construction allows the abrasive balls or stones to float assuring the brush will be self-aligning and self-centering to the tank or artillery bore and self-compensating for wear.

Cleaning Brushes
Within a few minutes the barrel will be copper free and spotless.
We use a 120 Grit Brush, this removes all propellant & firing residues.
Ideal for removing heavy deposit from tank barrels and artillery bores.

Polishing Brushes
Restores barrel or bore to white glove inspection level.
We use a 180 Grit Brush, this helps smooth out all the imperfections.
Will remove all your barrel imperfections, polish your barrel like new.

Pitting & Corrosion
Using the silicon carbide brushes will remove all your barrel imperfections including light pitting and rust.
Chemicals or Solvents are No Good in these situations, All you will do is spend money and waste valuable time.
The best way to handle the effects of pitting? Don’t let it happen in the first place! Use a GI Barrel Bore Cleaning Systems.

Cleaning Smooth Bore Series

  • CSB Series Cleaning Brushes 120 Grit
    Removes all firing residue, including copper, carbon lead and plastic.
  • PSB Series Polishing Brushes 180 Grit
    Polish and Fine tune your barrel, remove scratches or fine marks.
  • Swab Mop Smooth Bore
    Cotton swab brush for smooth bore.
Item Product Description PDF
Data Sheet Military Brushes Smooth Bore Brushes

CLEANING SMOOTH BORE 20 TO 40 MM

Brush Dia Type Material Free Military Quote 
CSB Cleaning Brush
PSB Polishing Brush
120 Grit
180 Grit

CLEANING SMOOTH BORE 50 TO 100 MM

Brush Dia Type Material Free Military Quote 
CSB Cleaning Brush
PSB Polishing Brush
120 Grit
180 Grit

CLEANING SMOOTH BORE 105 TO 155 MM

Brush Dia Type Material Free Military Quote 
CSB Cleaning Brush
PSB Polishing Brush
120 Grit
180 Grit

CLEANING SMOOTH BORE 155 - 175 mm

Brush Dia Type Material Free Military Quote 
CSB Cleaning Brush
PSB Polishing Brush
120 Grit
180 Grit

CLEANING SMOOTH BORE 175 mm & Over ( Large Bore Artillery)

Brush Dia Type Material Free Military Quote 
CSB Cleaning Brush
PSB Polishing Brush
120 Grit
180 Grit

Swab Mop Smooth Bore 20 mm to 240 mm

Swab Mop Smooth Bore
SMB Cotton Series
20 mm to 240 mm

Description
Swab Mop Smooth Bore

GI Industries cotton swab brush, Can be used for either removing excess fouling from the bore after cleaning.
Or to apply the barrel protection lubricants for storage and preservation .

  • Depleted Uranium Rounds

In the case of any barrel firing DU rounds we recommend, using the Hepa Vac for safety reasons.

DU used in US munitions has 60% of the radioactivity of natural uranium. Trace transuranics (another indicator of the use of reprocessed material) have been reported to be present in some US tank armour.

Do not breathe in toxic fumes or fouling from bore cleaning. The gases released by the pyrophoric nature of the rounds. And they are mildly radioactive, which

Item Type Calibers Free Military Quote 
SMB Brushes Smooth Bore 20 mm to 240 mm

Cleaning Rifled Barrels
20 mm to 105 mm

Description
Rifled Barrel Brush

GI Rifled Brushes are for use on many different Guns or Cannons. Ideally suited for weapons with a high fire rate. The GI rifled brushes have silicon abrasive-impregnated nylon filaments, and they are specially designed for cleaning military rifled barrels.

Silicon carbide does not damage the barrel or bore. This stiff abrasive brush is made over-sized so it bends over ensuring maximum contact, the short bristles are able to get into the grooves.

Bidirectional Cleaning

With the Bi-Directional cleaning, you can clean on the Forward & Reverse Rotation.
This enables you to ensure you get maximum penetration in the grooves and leaves you barrel free from Copper or Carbon fouling.

Cleaning Rifled Barrel Series

  • CRB Series Cleaning Brushes 120 Grit
    Removes all firing residue, including copper, carbon lead and plastic.
  • CRB High Density Series Twisted Brass
    Heavy duty high-density bronze bristle brush, They meet or exceed military specifications.
    Ideally suited  for all rifled barrels. Removes all copper fouling and firing residues.
  • Swab Mop Rifled Barrel
    Lint free swab brush for all rifled barrels.
Item Product Description PDF
Data Sheet Military Brushes Rifled Barrel Brushes

CLEANING RIFLED BARRELS 20 to 25 MM

Brush Dia  Material Free Military Quote 
Silicon Carbide
&
High Density Brush

CLEANING RIFLED BARRELS 30 TO 40 MM

Brush Dia  Material Free Military Quote 
Silicon Carbide
&
High Density Brush

CLEANING RIFLED BARRELS 50 TO 100 MM

Brush Dia  Material Free Military Quote 
Silicon Carbide
&
High Density Brush

CLEANING ARTILLERY RIFLED BARRELS

Description
Artillery Rifled Barrel Brush

For all Artillery Rifled Barrels over 100 mm, GI Industries have adapted our Smooth Bore Brush and fitted it with solid brass segment that cleans right down into the Grooves.

Rifled Barrel Brushes
Silicon & Brass

Rifled Cleaning Brush
Brass Segment cleans the Grooves part of the barrel.
We use a 120 Grit Brush, this removes all fouling on the Lans.

Enhanced Cleaning
The GI rifled brushes make uniform contact with the all parts of the gun barrel;(Lans & Grooves).

Dual Action
Bi-directional cleaning.
Forward for cleaning and reverse for polishing.

CLEANING ARTILLERY RIFLED BARRELS 105 TO 175 MM

Brush Dia  Material Free Military Quote 
Silicon Carbide
&
High Density Brush

CLEANING ARTILLERY RIFLED BARRELS 175 MM & Over

Description
Custom Artillery Rifled Barrel Brush

All rifled cleaning brushes over 175 mm, please email for details and costs.

SWAB MOP RIFLED BARREL 20 MM TO 240 MM

Swab Mop Rifled Barrel
SMB Cotton Series
20 mm to 240 mm

Description
Swab Mop Rifled Barrel

GI Industries lint free swab brush, Can be used for either removing excess fouling from the barrel after cleaning.
Or to apply the protection lubrication to rifled barrels for storage.

  • Depleted Uranium Rounds

In the case of any barrel firing DU rounds we recommend, using the Hepa Vac for safety reasons.

DU used in US munitions has 60% of the radioactivity of natural uranium. Trace transuranics (another indicator of the use of reprocessed material) have been reported to be present in some US tank armour.

Do not breathe in toxic fumes or fouling from bore cleaning. The gases released by the pyrophoric nature of the rounds. And they are mildly radioactive, which

Item Type Calibers Free Military Quote 
SMB Brushes Rifled Barrel 20 mm to 240 mm

Pneumatic Cleaning Brushes
Air Powered Series

Description
Pneumatic Cleaning Brushes

GI Industries develops and produces the Air Powered Bore Cleaning Systems that clean all types of smooth, rifled, chromed and steel barrels.

The barrel cleaning system can be supplied to clean barrels from 20mm up to 175 mm as standard. The system has a wide variety of steel / high density copper brushes.

The system can boast one-man, maintenance free, speedy operation and can be transported anywhere in its sturdy military container. An air-powered, fast, effective and one-man operation are the major advantages of this superior barrel management system.

Item Product Description PDF
Data Sheet Pneumatic Brushes Smooth Bore
Rifled Barrel

Pneumatic Cleaning Brush

Pneumatic Cleaning Brushes
Air Powered Series
20 mm to 240 mm

Description
Pneumatic Cleaning Brushes

Cleaning Brushes are made primarily from stainless steel and are designed as the first brush of use to clean out any debris and firing residues in the barrel within minutes.

Standard Brush

With steel tufts for a deep clean in all rifled and smooth bore barrels.

Custom Brushes

Can be manufactured from any material the customer requires:- Brass / Nylon or High Density Copper.

Calibers

Standard Calibers: 20 mm to 175 mm
Custom Calibers: Over 175 mm

Pneumatic Brushes Free Military Quote 

Pneumatic Squeegee Brush

Pneumatic Squeegee Brushes
Air Powered Series
20 mm to 240 mm

Description
Pneumatic Squeegee Brushes

Squeegee – which has rubber blades for removal of oil or preservatives.

Calibers

Standard Calibers: 20 mm to 175 mm
Custom Calibers: Over 175 mm

Pneumatic Brushes Free Military Quote 

Pneumatic Oiling Brush

Pneumatic Oiling Brush
Air Powered Series
20 mm to 240 mm

Description
Pneumatic Oiling Brushes

Oiling brushes with felt discs to oil the barrel after cleaning.
Oiling – for applying oil or fluid to the barrel.

Distributing – for depositing oil or AMSN (Advanced Mil Spec Nano) along the length of the barrel by prefilling the fluid into a chamber inside the brush for even and thorough distribution.

Calibers

Standard Calibers: 20 mm to 175 mm
Custom Calibers: Over 175 mm

Pneumatic Brushes Oil Dispenser Free Military Quote 

Weapons Cleaning Cloth
Small Arms Weapons
Large Bore Barrels

Where meticulous and virtually lint-free cleaning is important – eg small or large barrel bores – night vision, sights, optical equipment, engine rebuilds – polishing, etc. Its finely apertured surface efficiently collects dirt and residue – with high absorption and high resistance to scuffing.

Proven
On Challenger 2 gun barrel cleaning since 1999 and fully tested. Ideal for a host of other demanding tasks where exceptional cleaning and a lint-free surface is required.

Engineered
For the meticulous barrel cleaning of all small arms, tanks and larger guns alike.

Item Product Description PDF
Weapons Cloth Weapons Cleaning Cloth Lint Free

Weapon Cleaning Cloth

Item Type Sizes Free Military Quote 
Gun Cloth Small Arms
Large Bore
10 x 20 cm x 50 mtr
32 x 40 cm x 50 mtr
Small Arms Gun Cloth Large Bore Cloth Large Bore Cloth Sizes
Small Arms 750 perforated patches per roll.
Large Bore 500 perforated patches per roll